Horizontal injection molding machines, such as PP, PVC, ABS, PA, etc., are widely used in plastic injection molding industries. The horizontal injection molding machine is the most flexible plastic injection molding machine. The injection unit is fixed to the flat plate of the stationary plate and reciprocates at a certain distance. An injection unit with a screw and plunger structure is often used for multi-component or mixed-material molding. The horizontal injection molding machine is the best choice when doing two-color or 2 component injection molding.
Flexible use of horizontal injection molding machine
The horizontal injection molding machine is the most flexible plastic injection molding machine. It can be used for many different types of plastics, and it can be used for high and low-volume production. The horizontal injection molding machine can also produce a wide variety of parts that are difficult to make using other devices because they require complex shapes or unique materials.
The injection unit is fixed on the horizontal plate of the fixed bedplate.
The injection unit is fixed to the horizontal plate of the stationary plate and reciprocates at a certain distance. A motor drives the screw structure called a “ram-rod” because its appearance resembles that of a car’s ram rod. The plunger structure has two functions: one is to push forward material into the mold cavity, and another one is to raise ejector pins after ejecting molded products out from molds.
An injection unit with a screw and plunger structure is often used for multi-component or mixed-material molding. When you want to do two-color or 2 component injection molding, the horizontal injection molding machine is the best choice.
Injection unit with screw and plunger structure
The central injection unit, with a screw and plunger structure, is often used for multi-component or mixed-material molding. Two-component injection, three-component injection, and four-component injection can be realized by changing molds.
When you want to do two-color or two-component injection molding
The horizontal injection molding machine is the best choice when doing two-color or 2 component injection molding.
Horizontal Injection Molding Machine
You can use different colors and materials simultaneously in this type of machine. You can also use different colors during one cycle run if your product requires it. The main reasons for using this kind of machine are as follows:
1)You can avoid warping issues and defects that may occur when using single-colored plastic parts that have been molded in a traditional vertical injection molding machine.
2) The process of making multi-color or multi-component parts allows manufacturers to produce more complex designs with less waste by eliminating the need for assembly processes such as gluing multiple pieces together after molding them separately into one piece using a vertical system before finishing with additional coatings such as painting layers on top (also known as secondary operations).
3) It reduces costs by allowing companies without access to large quantities of raw materials needed for mass production via machines like those found in industries like aerospace, where there are usually strict requirements placed upon suppliers due to high volume demand needs, which means prices will increase exponentially due demand being more significant than supply; therefore alternative means must be employed when dealing with situations like these involving small businesses which means they will not be able to afford such expensive equipment even if they wanted too because most small businesses cannot afford investments like this unless they plan (that last part was just me being sarcastic).
Include two-component injection, three-component injection, and four-component injection.
The horizontal injection molding machine can be divided into two-component, three-component, and four-component. The main difference between the three components is that when using two-component materials, you must put the material into a one-component resin barrel and inject it into the mold through a screw. You must add a hardener or activator with your resin when using three-component materials. In other words, these are different combinations of resins and hardeners or activators.
Horizontal injection molding machines are widely used in plastic injection molding industries.
Horizontal injection molding machines, such as PP, PVC, ABS, and PA, are widely used in plastic injection molding industries. The advantages of flat molds are apparent: they can reduce the cost of mold processing and improve efficiency; their structure is simple, small in size, and easy to maintain.
Topstar can design and manufacture the horizontal injection molding machine according to your requirements. If you want to buy one, please get in touch with us. Our contact information is:+86 13676260089, and email: waimao@topstarltd.com